5 Ports 10/100Mbps Unmanaged Industrial Ethernet Network Switch
Introduction:
The IES100-5F is one fiver port 10/100Mbps BaseT industrial switch. The industrial Ethernet Switch is a cost-effective solution and meets the high reliability requirements demanded by industrial applications.
1.1 High-Speed Transmissions
The Industrial Ethernet Switch including 10/100Mbps. The RJ-45 interface can also be auto-detected, so MDI or MDI-X is automatically.
and a crossover cable is not required. All Ethernet ports have memory buffers that support the store-and-forward mechanism. This assures that data is properly transmitted.
1.1.2 Dual Power Input
The industrial Ethernet Switch offer redundant power input design is with power reserve protection to prevent the switch device broken by wrong power wiring.
1.3 Flexible Mounting
The industrial Ethernet Switch is extremely compact (36 x 130 x 94 mm) and can be mounted on a DIN-rail or a panel, so it is suitable for any space-constrained environment.
1.4 Advanced Protection
The industrial Ethernet switch supports up to 3,000 VDC surge protection for power line, and also supports 4000V ESD for each port.
1.5 Wide Operating Temperature
The operating temperature of the industrial Ethernet Switch is between -40℃ ~85℃ With such a wide range, you can use the Ethernet Switch in some of the harshest industrial environments that exist.
Main Features:
* Supports full/half duplex flow control
* Supports store and forward transmission
* Supports auto-negotiation
* Supports MDI/MDI-X auto crossover
* Provides surge protection (EFT) 3,000 VDC for power line
* Supports 4,000 VDC ESD protection for Ethernet
* Supports +10 ~ 5 5 VDC power input( Non-PoE)
* Supports +48 ~ 55 VDC power input( PoE)
* Provides flexible mounting: DIN-rail, Wall Mounting
* Supports operating temperature from -40℃ ~ 85℃* IP40 rated metal case
Installation
You can also mount our Industrial Ethernet Switch on a standard DIN-rail.
The DIN-rail kit is screwed on the industrial switch when out of factory. If the DIN-rail kit is not screwed on the industrial switch, please screw the DIN-rail kit on the switch first.
